Perform a factory reset on Algiz RT10
Last updated: 2025-05-15
Related products: Algiz RT10
Ensure that you have backed-up all critical data prior to performing a factory reset on your device as a factory reset will erase all data and will be unrecoverable.
Follow the instructions below to perform a factory reset on Algiz RT10.
1. Power off the unit.
2. Hold Volume up and Power button for 10 seconds and wait until you see the recovery menu.
3. You should see the Android robot with the message “No command” (if you see the recovery menu, skip to step 5).
4. Hold Power and press Volume up to show the recovery menu.
5. Use the volume keys to navigate to Wipe data/Factory reset.
6. Press Power to select.
7. Confirm reset and wait for the process to finish.
8. In the recovery menu, select Reboot system now and press Power.
Once these steps have been completed, your Algiz RT10 device will be at the default factory settings.